Description
- Technical Specifications
- Tests on line Up to 99
- Programmable tests 100 photometric, 3 ISE, 3 serum index, 20 calculated
- Throughput, test per hour 400 photometric + 400 ISE
- Measuring methods End point, fixed time and kinetic
- Sample loading Up to 75 sample containers in the tray
- Sample container Primary tubes and cups
- Sample volume From2 to 40 ?L (step 1 ?L)
- Reagent dispensing Directpick-up method
- Number of reagents on board Up to 96, refrigerated
- Reagent containers 10, 20, 25, 50 and 100 mL bottles
- Reagent volume From20 to 400 ?L (step 5 ?L) for reagents 1, 2, 3 and 4
- Total volume of reaction From180 to 400 ?L
- Reaction cuvettes 81 permanent Pyrex? glass, 5 mm optical pathlength
- Reaction time and photometric readings 9.6 min, 33 data points (up to 2-reagent tests) – 21.8 min, 74 data points (up to 4-reagent tests)
- Photometric system Directphotometry, stationary photometric unit, rotating cuvettes
- Available wavelengths 12 wavelengths ranging from 340 to 850 nm, holographic gating and photodiode array
- Signal output Bi-directional RS -232 interface integral to the system
- ISE channels Sodium, Potassium, Chloride
- ISE measuring technique Indirect potentiometry, sample dilution ratio 1 :21.7
- ISE electrodes Single channel, maintenance free
- ISE calibration Automatic internal periodic calibration
- Installation Requirements
- Power requirement 120 – 230 V ? 10 %, 50/60 Hz, 2 KVA
- Power consumption 1.6 KVA
- Ambient temperature/humidity 15 – 30 ?C, 45 – 85 % RH noncondensing
- Dimensions / Weight 98 W x 76 D x 118 H cm / 300 Kg
- Purified water supply inlet Max 24 Litres/hour, 0.5 to 3.5 kg/cm2 of pressure
